2017 high quality palm oil processing and extraction machine

2017 high quality palm oil processing and extraction machine has auto liquid filling system to realize constant level. The bottle orientation system adopts fixed distance, no accumulated tolerence error, to insure reliable bottle filling.

It is mainly applicable to a variety of viscous, non-viscous, corrosive and non-corrosive liquids, and widely used in the quantitative small packages of vegetable oil, lubricants, chemical liquids, and daily chemical products, etc. salad oil, shampoo liquid ,and others .

2017 high quality palm oil processing and extraction machine

Product Description

Introduction of our palm oil production mill equipment

1>. Palm oil mill have main ten parts: Reception Station,Sterilizer,Threshing,Press,Clarification, Kernel Recover, power station, boiler station, water treatment plant, oil storage tank.

2>. We use the Fresh Fruit Bunch, because the palm fruit rancidity is very fast, if the rancidity will be influence the palm crude oil acid value, if the acid value is very high, the refining efficiency will drop.

3>. Generally speaking, The palm fruit processing plant is LD away from the palm orchard.

Main Part Process

Main parts of our palm oil production mill equipment

1>. Reception Station:

Used for loading palm fruit brunch from plantation,transport to sterilizer. Reception station adopt steel structure and concrete structure. Save equipment cost and construction cost.Have hydraulic control system, hydraulic door open/off automatic achieve continuous operation. Reduce operator, operate more easily and improve work efficiency.

2>. Sterilizing Tank:

The sterilizing tank uses direct steam to process, which can reduce activity of the enzyme,prevent the rancidity, ensure the good quality of the crude oil. At the same time, it is good for the threshing process.

3>. Threshing station:

Fresh palm fruits separate from bunches by thresher rotary drum rotating. Palm fruits are conveyed to digester by elevator.Empty bunches are coveyed out of factory by scraperconveyor. Thresher shaft uses once forging technoloLD. The equipment is stronger and has longerlife. At the same time, our company developes nonshaft thresher drived by chain. In this way, it reduces power loss and saves production cost.

4>. Digestor station:

Inside of digestor, there are some baffle and stirring arm, under the drive of top motor.Baffles break the palm fruit, then heat palm fruit pulp. So that can press oil easily. Get higher oil yield. Meanwhile there is directly steam inlet digester, to adjust material moisture.

5>.Pressing Machine:

The palm fruit oil yield increases by adjusting material moisture and temperature in digester. Digester uses liquid level control, so material can distribute automatically and equipment runs fully automatically. Pressing machine uses hydraulic control system to adjust spacing between pressing bolts. So it can be suitable for various palm fruit species and guarantee the oil yield.

6>.Kernel Recovery Station:

Using air duct system to separate palm shell and kernel. Meanwhile, using special mud bath equipment to separate palm kernel and shell according to their different density. So it has high separation rate. There are some fiber cover the palm nut, in order to get palm kernel, should remove the fiber and palm shell.Fiber and shell is very good resource for boiler fuel.

7>.Clarification Station:

Oil purifying system, using latest technoloLD, on the premise that guarantee oil quality, we try our LD to reduce machine inverstment and oil loss. In actul production, it has been verified that using new technoloLD can reduce oil loss below 1.3%.

8>.Power station:

Customers usually use generators to produce power for the palm oil extraction plant.

9>.Boiler station:

After drying the palm fruit fiber can be used for burning the boiler station, and offering high temperature steam to sterilize the palm fruit bunch and so on.

Company Information

LD LD Group

LD LD Group was founded in 1976, after forty years of development and growth,the company has become a well-known grain and oil machinery manufacturing enterprise in China with import and export rigLDs. In 2002,our company passed ISO9001 Quality Management System Certificate, and established the National Food Processing Equipment Engeering R&D Sub-center and the provincial post-doctoral research base and other research and development plasforLD.

Our customers visit our factory

Advantage

You choose our product advantage

FAQ

Q1 : Which kind of other materials can be processed?
All kinds of oil seeds. For example, sunflower seeds, rice bran, corn germ, palm fruit, palm kernel, coconut, peanut, soybean, sesame, cottonseeds, rapeseed, etc.but will have some oil equipment is different,we will design the LD palm oil mill for you.

Q2 : What's the capacity of this palm oil mill?

Generally, 10-5000 tons per day. We can also manufacture as per customers' requirements.

Q3 : How long is the warranty?

The main parts of the machine come with one year warranty and after the expiration our engineer is available overseas to do the maintenance work.

Q4 : Can the machine be installed locally?

We can do the turn-key projects or other services according to customers'requirements, according to this condition, Our Services include manufacturing, purchasing, transporting, installation, training labors etc.

Contact me

How to contact us?

If you want more detail of this machine,Please send your inquiry details in the below for free sample, Click "send" Now!