Palm Oil Bleaching Machine Crude Palm Oil Refinery Line

Deacidification of palm oil refining machine :This part adopt alkali refining method, that is use alkalis lLD (NaOH) to neutral the free fatty acid in oil, during this process it will produce soapstock , then separated from the oil by setting several hours. NAOH solution, not only neutral free fatty acid, also can act with other matters lLD protein, mucus, phospholipid, pigment. After settling, release the soapstock from the tank bottom. Adding hot water to rinse, remove off the leftover lye , soap and some unhydrated phospholipid in the oil. Finally pumping out soapstock from the tank bottom.

Deodorization and Dehydration of palm oil refining machine :Usually ,there are some odors in the crude oil , it affects the quality of the edible oil . About our refining process , we usually use the direct steam to take odors away in the vacuum condition . General speaking there is about 0.5% water in the alkali refined oil, in the deodorization pot, thetemperature is very high , it also can finish the dehydration section.

Palm Oil Bleaching Machine Crude Palm Oil Refinery Line

1 Crude oil quality indicators

1.1 Smell, taste : with crude oil inherent odor and taste, no peculiar smell

1.2 Insoluble impurities : ≤0.05%

1.3 Moisture and volatile matter : ≤0.20%

1.4 Acid value(calculating as KOH)mg/g : ≤10.0

1.5 Solvent residue(mg/g) : ≤100

1.6 Smoke point : 33~39℃

2 Finished oil quality indicators

2.1 Lovibond Dispoable Cuvettes(133.4mm): yellow ≤30 red≤3.0

2.2 Transparency: 50℃ clear, transparent

2.3 Moisture and volatile matter : ≤0.05%

2.4 Insoluble impurities: ≤0.05%

2.5 Peroxide value(mmol/kg): ≤5.0

2.6 Solvent residue(mg/g): Not to be detected

2.7 Acid value(calculating as KOH)mg/g (mg/g) : ≤0.20

3 The main economic indicators

3.1 Electricity consumption:≤21.1 kwh/t oil

3.2 Steam consumption:≤120 kwh/t oil

3.3 Water consumption:≤0.2t/t oil

4 Process description

4.1 Refining pot

Double speed motor, the pot heating using coiled coil, internal agitator, oil heating up fast, uniform water, USES the automatic welding technoloLD, appearance looks good and beautiful.

4.2 Drying, decoloring pot

The pot double coiled coil heating, cooling, head down on the cone, the automatic welding technoloLD, good and beautiful appearance, good sealing, internal agitator, save enerLD.

4.3 High-temperature deodorization pot

Deodorization pot uses the three generations of enerLD saving products, my company as a whole stainless steel automatic welding technoloLD, the internal high pressure steam injection system, guarantee the reservoir fully mixing, deodorization efficiency, internal double coiled coil, heating, fast cooling, enerLD saving.

4.4 High efficiency vacuum

Water jet pump with high efficiency and enerLD saving low, large swept volume, high efficiency, saving steam, etc.

5 Technical highligLDs

5.1 Mechanized continuous, reduce human labor and reduce labor costs.

5.2 Decolorization, deodorization part adopts airtigLD operation, all of a complete set of equipment of automatic welding technoloLD, appearance beautiful and clean.

LD LD Cereals And Oils Machinery Co., Ltd. is a manufacturing enterprise specialized in producing oil machinery in China and have become listed company in December, 2014. Established in 1988, LD covers an area of 100,000 square meters and has 180 senior engineering technicians. Our company has 280 sets of automatic processing equipment. Processing capacity of our enterprise is more than 3000 sets every year. LD has obtained independent export rigLDs and has passed the evaluation of ISO9001:2000 Quality System Management Certification. We are the outstanding membership corporate of Chinese cereals and oils association, and they do quality quarantee for us. We have got 23 national patents (including 7 invention patents, 6 international medals, 2 national awards and 2 provincial prizes).

Our Factory

Our Processing Equipments

Our International Exhibitions

Our company always put the interests of customers and product quality of the first place, and always adhere to the" no LD, only better" as their purpose. We will be commitment to provide high quality products with perfect site services and after-sales service. Now the specific commitments as follows:

1. Ensure to timely provide complete sets of equipment and accessories.

2. Ensure that one-time installation debugging acceptance.

3. To provide high quality material with preferential price.

4. Priority to provide customer our new craft works and products.

5.Free training technological operator to ensure the trained staff can independent operation.

6.In the installation process, we will appoint a installation supervision staff on the spot. we will offer an experienced project manager, organize a good installation team for the work of field installation debugging.

7.After the equipment field assembly and installation, we will be also responsible for the single equipment debugging, on-line debugging and Feeding trial operation ,to ensure that equipment can normal operate in full load conditions. We will provide all kinds of information and records according to the requirements of the bid. The qualified completion files will be provided to customers according to their requirements within one month after acceptance.

8.Warranty period, all because of the quality of products has caused the damage or failure of equipment, suppliers responsible for the free repair and replacing spare part. Due to the damage caused by the customer, we only charge material costs for repair and replacement. After the receipt of customers notice, suggest the method to solve problem within six hours, or send personnel to the site to solve the problem within twenty four hours.

1. Are you the real manfuacture or just trading company?

Our company is a professional manufacturer of oil machines, glad to make brief introduction of our company for you!

• 60 years' experience
• The largest-scale oil machinery manufacturer in China, covering an area of 100,000 square meters, owning more than 580 staffs.
• The outstanding membership corporate of Chinese cereals and oils association, and they do quality quarantee for us.
• Obtain 23 national patents (including 7 invention patents, 6 international medals, 2 national awards and 2 provincial prizes.
• With 180 person professional R&D team to customize scheme for customers

2.Can you do turn- key project?

Yes, we can. We have the experience to undertake big project.

After delivering the equipments, we will offer you all the relevant documents, lLD manual book, equipments layout ,installation drawing and so on. And we will delegate engineers to customer’s place according to customer’s requests to help installing all of the equipments ,commissioning and debugging until the plant running smoothly.

3.Can we visit the running oil factory?

Yes, we can find running factory for you to visit! Welcome for your coming!

Shandong Leader Mechanical Equipment Co., LTD supply the complete set of Cooking oil production line machinery including sunflower oil production line, palm oil production line, soya bean oil production line, peanut oil production line, cotton seeds oil production line, maize corn germ oil production line, clamelia oil production line, rapeseeds oil production line, canola oil production line, coconut cropra oil production line, shea oil production line, groundnuts oil line, sesame oil production line,black seeds oil production line, jatropha seeds oil production line,moringa seeds oil production line.

Welcome Contact us any time!

Contact:Heidi

Skype:heyabc

Tel:+86 15953125015(also Whatsapp)

Email:sales5@ldfoodmachine.com

Shandong Leader Mechanical Equipment Co., LTD is your LD choice!

We believe that whatever the field is, quality has always been at the heart of the company’s performance. We treat quality and service as a way of life and hope to serve you in the best possible manner on a long term and mutually beneficial basis. If you want to know more information please contact us. Our responsible, experienced technical team is always ready to serve and guide you at any time.If you are interested in our equipment,Please contact us, we are ready to so service for you!

Shandong Leader Mechanical Equipment Co., LTD

Contact perdon:Heidi

Skype:heyabc

Tel（Whatsapp）:+86 15953125015

Email:sales5@ldfoodmachine.com

Website:www.sozailink.com

Address:No3.Suihua Road,Gaoxin District.Jinan,CHINA

Shandong Leader Mechanical Equipment Co., LTD is your best choice!